
Article 1 
Annex I to Implementing Regulation (EU) No 136/2012 shall be replaced by the Annex I to this Regulation.
Article 2 
Annex II to Implementing Regulation (EU) No 136/2012 shall be replaced by the Annex II to this Regulation.
Article 3 
The substance specified in the Annex, and feed containing it, which are produced and labelled before 10 September 2017 in accordance with the rules applicable before 10 September 2015 may continue to be placed on the market and used until the existing stocks are exhausted.
Article 4 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 20 August 2015.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX I


‘ANNEX I 
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg/kg of complete feedingstuff with a moisture content of 12 %
Category of technological additives. Functional group: acidity regulators
1j514ii — Sodium bisulphate 
Sodium bisulphate: ≥ 95,2 %

Sodium bisulphate CAS No 7681-38-1

NaHSO4

Na 19,15 %

SO4 80,01 %

Produced by chemical synthesis

Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution.
 Pets and other non-food producing animals other than cats and mink — — 4 000  1. In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting.
 2. For safety: breathing protection, eye protection and gloves shall be used during handling.
 3. The total content of sodium bisulphate must not exceed the maximum permitted levels in complete feedingstuff established for each relevant species
 8 March 2022
Cats 20 000
Mink 10 000


ANNEX II


‘ANNEX II 
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg/kg of complete feedingstuff with a moisture content of 12 %
Category of sensory additives. Functional group: flavouring compounds
1j514ii — Sodium bisulphate 
Sodium bisulphate: ≥ 95,2 %

Sodium bisulphate CAS No 7681-38-1

NaHSO4

Na 19,15 %

SO4 80,01 %

Produced by chemical synthesis

Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution.
 Pets and other non-food producing animals other than cats and mink — — 4 000  1. In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting.
 2. For safety: breathing protection, eye protection and gloves shall be used during handling.
 3. The total content of sodium bisulphate must not exceed the maximum permitted levels in complete feedingstuff established for each relevant species.
 8 March 2022
Cats 20 000
Mink 10 000

