
Article 1 
The reference of standard EN 60335-2-15:2002, as last amended by A11:2012, ‘Household and similar electrical appliances — Safety — Part 2-15: particular requirements for appliances for heating liquids’ shall be published in the Official Journal of the European Union and under national procedures with restriction as set out in the Annex.
Article 2 
This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Done at Brussels, 13 July 2015.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

ESO Reference and title of the harmonised standard(and reference document) Reference of superseded standard Date of cessation of presumption of conformity of superseded standard
Note 1
Cenelec EN 60335-2-15:2002Household and similar electrical appliances — Safety — Part 2-15: Particular requirements for appliances for heating liquidsIEC 60335-2-15:2002 EN 60335-2-15:1996+ A1:1999+ A2:2000 Date expired(1.7.2007)
Note 2.1
EN 60335-2-15:2002/A1:2005IEC 60335-2-15:2002/A1:2005 Note 3 Date expired(1.9.2008)
EN 60335-2-15:2002/A2:2008IEC 60335-2-15:2002/A2:2008 Note 3 Date expired(1.8.2013)
EN 60335-2-15:2002/A11:2012 Note 3 23.1.2015
EN 60335-2-15:2002/A11:2012/AC:2013  
EN 60335-2-15:2002/AC:2006  
Restriction: The application of this publication does not confer a presumption of conformity with the safety objectives provided for in point 1(d) in conjunction with point 2(b) of Annex I to Directive 2006/95/EC, in particular with respect to the hazards arising from the overflowing of hot coffee or hot liquids, in respect of appliances intended for, or known by experience to be used for, preparing certain kinds of coffee, or for heating certain liquids (e.g. milk) that expand during the coffee making or the liquid heating process.

Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.
Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.
Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.