
Article 1 
The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Article 2 
Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 12(6) of Regulation (EEC) No 2913/92 for a period of three months from the date of entry into force of this Regulation.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 11 November 2014.
For the Commission,
On behalf of the President,
Heinz ZOUREK
Director-General for Taxation and Customs Union
ANNEX

Description of the goods Classification(CN-code) Reasons
(1) (2) (3)
A cannulated, cylindrical, threaded product made of extra hard titanium alloy, of a length of between 20 to 56 mm.The product has a cannulated shank with an outer diameter of 4 mm and a head with a hexagonal drive. The shank is wholly threaded in 2 mm increments.The product corresponds to the ISO/TC 150 standards for implant screws and is presented for use in the field of trauma surgery for setting fractures.It is to be installed in the body using specific tools and by means of a guide wire, which is to be inserted in the cannulated shaft and which allows precise placement through a small incision in the body.At importation, it is presented in a sterilised packing. The product is marked with a number and therefore traceable throughout production and distribution. 9021 10 90 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 9021, 9021 10 and 9021 10 90.Due to its objective characteristics, namely the presence of the cannulated shaft, the product does not entirely correspond to a screw of base metal. Consequently, it cannot be considered a part of general use (screw) as referred to in note 2 to Section XV. Therefore, classification under heading 8108 is excluded.The product is therefore to be classified under CN code 9021 10 90 as splints and other fracture appliances.