
Article 1 
Regulation (EU) No 73/2010 is amended as follows:

((1)) Article 3 is amended as follows:

((a)) point (7) is replaced by the following:
'
(7) 

((a)) aeronautical information publications (hereinafter AIP), including amendments;
((b)) supplements to the AIP;
((c)) the NOTAM, as defined in point 17 and pre-flight information bulletins;
((d)) aeronautical information circulars; and
((e)) checklists and lists of valid NOTAMs;
'
((b)) point (8) is replaced by the following:
'
(8) “obstacle data” means data concerning all fixed (whether temporary or permanent) and mobile objects, or parts thereof, that are located on an area intended for the surface movement of aircraft or that extend above a defined surface intended to protect aircraft in flight or that stand outside those defined surfaces and that have been assessed as being a hazard to air navigation;
'
((c)) point (10) is replaced by the following:
'
(10) “aerodrome mapping data” means data collected for the purpose of compiling aerodrome mapping information;
'
((d)) point (13) is replaced by the following:
'
(13) “aeronautical information service provider” means the organisation responsible for the provision of an aeronautical information service, certified in accordance with the requirements of Commission Implementing Regulation (EU) No 1035/2011;
'
((e)) point (24) is replaced by the following:
'
(24) “critical data” means data as classified under point (c) of the integrity classification defined in Chapter 1, Section 1.1 of Annex 15 to the Chicago Convention on International Civil Aviation (hereinafter the Chicago Convention);
'
((f)) point (25) is replaced by the following:
'
(25) “essential data” means data as classified under point (b) of the integrity classification defined in Chapter 1, Section 1.1 of Annex 15 to the Chicago Convention;
'
((2)) In Article 7, paragraph 5 is replaced by the following:
'
5. Without prejudice to Implementing Regulation (EU) No 1035/2011, the parties referred to in Article 2(2) shall ensure that their personnel responsible for tasks in the provision of aeronautical data or aeronautical information are adequately trained, competent and authorised for the job they are required to do.'
((3)) In Article 10, paragraph 1 is replaced by the following:
'
1. Without prejudice to Implementing Regulation (EU) No 1035/2011, the parties referred to in Article 2(2) shall implement and maintain a quality management system covering their aeronautical data and aeronautical information provision activities, in accordance with the requirements laid down in Annex VII, Part A.'
((4)) Annex I is amended in accordance with Annex I to this Regulation.
((5)) Annex III is replaced by the text in Annex II to this Regulation.
((6)) Annex XI is replaced by the text in Annex III to this Regulation.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 26 September 2014.
For the Commission
The President
José Manuel BARROSO
ANNEX I

In Annex I, part B, point (a) is replaced by the following:
'
(a) be provided digitally in accordance with the ICAO standards referred to in points 9, 9a and 12 of Annex III;
'

ANNEX II


ANNEX III  1. Chapter 3, Section 3.7 (Quality management system) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 2. Chapter 3, Section 1.2.1 (Horizontal reference system) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 3. Chapter 3, Section 1.2.2 (Vertical reference system) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 4. Chapter 4 (Aeronautical Information Publications (AIP)) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 5. Chapter 4, Section 4.3 (Specifications for AIP Amendments) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 6. Chapter 4, Section 4.4 (Specifications for AIP Supplements) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 7. Chapter 5 (NOTAM) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 8. Chapter 6, Section 6.2 (Provision of information in paper copy form) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 9. Chapter 10, Section 10.1 (Coverage areas and requirements for data provision) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 9a Chapter 10, Section 10.2 (Terrain data set — content, numerical specification and structure) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37
 10. Appendix 1 (Contents of Aeronautical Information Publication (AIP)) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 11. Appendix 7 (Aeronautical data publication resolution and integrity classification) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 12. Appendix 8 (Terrain and obstacle data requirements) of Annex 15 to the Chicago Convention — Aeronautical Information Services (Fourteenth edition — July 2013, incorporating Amendment No 37).
 13. Object Management Group Unified Modelling Language (UML) Specification Version 2.1.1.
 14. International Organisation for Standardisation, ISO 19107:2003 — Geographic information — Spatial schema (Edition 1 — 8.5.2003).
 15. International Organisation for Standardisation, ISO 19115:2003 — Geographic information — Metadata (Edition 1 — 8.5.2003 [Corrigendum Cor 1:2006 5.7.2006]).
 16. International Organisation for Standardisation, ISO 19139:2007 — Geographic information — Metadata — XML schema implementation (Edition 1 — 17.4.2007).
 17. International Organisation for Standardisation, ISO 19118:2011 — Geographic information — Encoding (Edition 2 — 10.10.2011).
 18. International Organisation for Standardisation, ISO 19136:2007 — Geographic information — Geography Mark-up Language (GML) (Edition 1 — 23.8.2007).
 19. International Organisation for Standardisation, ISO/IEC 19757-3:2006 — Information technology — Document Schema Definition Languages (DSDL) — Part 3: Rule-based validation — Schematron (Edition 1 — 24.5.2006).
 20. ICAO Doc 9674-AN/946 — World Geodetic System — 1984 Manual (Second Edition — 2002).
 21. Chapter 7, Section 7.3.2 (Cyclic redundancy check (CRC) algorithm) of ICAO Doc 9674-AN/946 — World Geodetic System — 1984 (WGS-84) Manual (Second Edition — 2002).
 22. International Organisation for Standardisation, ISO/IEC 27002:2005 — Information technology — Security techniques — Code of practice for information security management (Edition 1 — 15.6.2005).
 23. International Organisation for Standardisation, ISO 28000:2007: — Specification for security management systems for the supply chain (Edition 1 — 21.9.2007 under revision, to be replaced by Edition 2 target date 31.1.2008 [At enquiry stage]).
 24. Eurocae ED-99A, User Requirements for Aerodrome Mapping Information (October 2005).
 25. International Organisation for Standardisation, ISO 19110:2005 — Geographic information — Methodology for feature cataloguing (Edition 1).


ANNEX III


ANNEX XI 
Chapter 3, Section 3.5.2 (Cyclic redundancy check) of Annex 15 to the Chicago Convention — Aeronautical Information Services. (Fourteenth edition — July 2013, incorporating Amendment No 37).

