
Article 1 

1. The declarations referred to in point (a) of Article 7(2) and of Article 11(2) of Regulation (EU) No 576/2013 shall be drawn up in accordance with the format and layout set out in Part 1 of Annex I to this Regulation and shall comply with the language requirements set out in Part 3 of that Annex.
2. The declaration referred to in point (c) of Article 12(1) of Regulation (EU) No 576/2013 shall be drawn up in accordance with the format and layout set out in Part 2 of Annex I to this Regulation and shall comply with the language requirements set out in Part 3 of that Annex.
Article 2 

1. The list of territories and third countries referred to in Article 13(1) of Regulation (EU) No 576/2013 is set out in Part 1 of Annex II to this Regulation.
2. The list of territories and third countries referred to in Article 13(2) of Regulation (EU) No 576/2013 is set out in Part 2 of Annex II to this Regulation.
Article 3 

1. The passport referred to in Article 21(1) of Regulation (EU) No 576/2013 shall be drawn up in accordance with the model set out in Part 1 of Annex III to this Regulation and shall comply with the additional requirements set out in Part 2 of that Annex.
2. By way of derogation from paragraph 1, passports issued, pursuant to point (a) of Article 27 of Regulation (EU) No 576/2013, in one of the territories or third countries listed in Part 1 of Annex II to this Regulation shall be drawn up in accordance with the model set out in Part 3 of Annex III to this Regulation and shall comply with the additional requirements set out in Part 4 of that Annex.
Article 4 
The animal health certificate referred to in Article 25(1) of Regulation (EU) No 576/2013 shall be:

((a)) drawn up in accordance with the model set out in Part 1 of Annex IV to this Regulation;
((b)) duly completed and issued in accordance with the explanatory notes set out in Part 2 of that Annex;
((c)) supplemented by the written declaration referred to in Article 25(3) of Regulation (EU) No 576/2013 which is drawn up in accordance with the model set out in Section A of Part 3 of that Annex and which complies with the additional requirements set out in Section B of Part 3 of that Annex.
Article 5 
Decisions 2003/803/EC, 2004/839/EC and 2005/91/EC are repealed.
Article 6 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 29 December 2014.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 28 June 2013.
For the Commission
The President
José Manuel BARROSO
ANNEX I
Format, layout and language requirements of the declarations  PART 1  PART 2  PART 3 
The declarations shall be drawn up in at least one of the official language(s) of the Member State of destination/entry and in English.

ANNEX II
ISO code Territory or third country
AD Andorra
CH Switzerland
FO Faeroe Islands
GI Gibraltar
GL Greenland
HR Croatia
IS Iceland
LI Liechtenstein
MC Monaco
NO Norway
SM San Marino
VA Vatican City State

ISO code Territory or third country Included territories
AC Ascension Island 
AE United Arab Emirates 
AG Antigua and Barbuda 
AR Argentina 
AU Australia 
AW Aruba 
BA Bosnia and Herzegovina 
BB Barbados 
BH Bahrain 
BM Bermuda 
BQ Bonaire, Sint Eustatius and Saba (the BES Islands) 
BY Belarus 
CA Canada 
CL Chile 
CW Curaçao 
FJ Fiji 
FK Falkland Islands 
HK Hong Kong 
JM Jamaica 
JP Japan 
KN Saint Kitts and Nevis 
KY Cayman Islands 
LC Saint Lucia 
MS Montserrat 
MU Mauritius 
MX Mexico 
MY Malaysia 
NC New Caledonia 
NZ New Zealand 
PF French Polynesia 
PM Saint Pierre and Miquelon 
RU Russia 
SG Singapore 
SH Saint Helena 
SX Sint Maarten 
TT Trinidad and Tobago 
TW Taiwan 
US United States of America AS – American SamoaGU – GuamMP – Northern Mariana IslandsPR – Puerto RicoVI – US Virgin Islands
VC Saint Vincent and the Grenadines 
VG British Virgin Islands 
VU Vanuatu 
WF Wallis and Futuna 
YT Mayotte 

ANNEX III
PART 1
PART 2
1. 
The dimension of the passport shall be 100 × 152 mm.

2. 

((a)) front cover:

((i)) colour: blue (PANTONE® Reflex Blue) and yellow stars (PANTONE® Yellow) in the upper quarter complying with the specification of the European emblem;
((ii)) the words ‘European Union’ and the name of the Member State of issue shall be printed in the same typeface;
((iii)) the ISO country code of the Member State of issue followed by a unique alphanumeric code (indicated as ‘number’ in the model of passport set out in Part 1) shall be printed on the bottom;
((b)) inside front cover and inside back cover: colour white;
((c)) back cover: colour blue (PANTONE® Reflex Blue).

3. 

((a)) the sequence of the headings (with the roman numbers) must be strictly respected;
((b)) the pages of the passport shall be numbered at the bottom of each page in the following format: ‘x out of n’, where x is the current page and n is the total number of pages of the passport;
((c)) the ISO country code of the Member State of issue followed by a unique alphanumeric code shall be printed on each page of the passport;
((d)) the number of pages and the size and shape of the boxes in the model of passport set out in Part 1 are indicative.

4. 
All printed text shall be in the official language(s) of the Member State of issue and in English.

5. 

((a)) after the required information has been entered in Section III of the passport, a transparent adhesive laminate shall seal the page;
((b)) where the information on one of the pages of the passport takes the form of a sticker, a transparent adhesive laminate shall seal that sticker in the case where the latter is not self-destructed when it is removed.

PART 3
PART 4
1. 
The dimension of the passport shall be 100 × 152 mm.

2. 

((a)) front cover:

((i)) colour: PANTONE® monochrome and national emblem in the upper quarter;
((ii)) the ISO country code of the territory or third country of issue followed by a unique alphanumeric code (indicated as ‘number’ in the model of passport set out in Part 3), shall be printed on the bottom;
((b)) inside front cover and inside back cover: colour white;
((c)) back cover: colour PANTONE® monochrome.

3. 

((a)) the sequence of the headings (with the roman numbers) must be strictly respected;
((b)) the pages of the passport shall be numbered at the bottom of each page in the following format: ‘x out of n’, where x is the current page and n is the total number of pages of the passport;
((c)) the ISO country code of the territory or third country of issue followed by a unique alphanumeric code shall be printed on each page of the passport;
((d)) the number of pages and the size and shape of the boxes in the model of passport set out in Part 3 are indicative.

4. 
All printed text shall be in the official language(s) of the territory or third country of issue and in English.

5. 

((a)) after the required information has been entered in Section III of the passport, a transparent adhesive laminate shall seal the page;
((b)) where the information on one of the pages of the passport takes the form of a sticker, a transparent adhesive laminate shall seal that sticker in the case where the latter is not self-destructed when it is removed.

ANNEX IV
PART 1
PART 2
(a) Where the certificate states that certain statements shall be kept as appropriate, statements which are not relevant may be crossed out and initialled and stamped by the official veterinarian, or completely deleted from the certificate.

(b) The original of each certificate shall consist of a single sheet of paper, or, where more text is required it must be in such a form that all sheets of paper required are part of an integrated whole and indivisible.

(c) The certificate shall be drawn up in at least one of the official languages of the Member State of entry and in English. It shall be completed in block letters in at least one of the official languages of the Member State of entry or in English.

(d) If additional sheets of paper or supporting documents are attached to the certificate, those sheets of paper or document shall also be considered as forming part of the original of the certificate by the application of the signature and stamp of the official veterinarian, on each of the pages.

(e) When the certificate, including additional sheets referred to in point (d), comprises more than one page, each page shall be numbered (page number of total number of pages) at the end of the page and shall bear at the top of each page the certificate reference number that has been designated by the competent authority.

(f) 
The colour of the signature shall be different from that of the printing. This requirement also applies to stamps other than those embossed or watermarked.

(g) The certificate reference number referred to in Boxes I.2 and II.a shall be issued by the competent authority of the territory or third country of dispatch.

PART 3
Section A
Section B
The declaration shall be drawn up in at least one of the official language(s) of the Member State of entry and in English and shall be completed in block letters.
