
Article 1 
The preparation specified in Annex I, belonging to the additive category ‘technological additives’ and to the functional group ‘acidity regulator’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.
Article 2 
The preparation specified in Annex II, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.
Article 3 
This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 16 February 2012.
For the Commission
The President
José Manuel BARROSO
ANNEX I

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg/kg of complete feedingstuff with a moisture content of 12 %
Category of technological additives. Functional group: acidity regulators
1j514ii — Sodium bisulphate 
 Additive composition
Sodium bisulphate: ≥ 95,2 %
 Characterisation of the active substance
Sodium bisulphate CAS No 7681-38-1

 NaHSO4
 Na 19,15 %
 SO4 80,01 %Produced by chemical synthesis
 Method of analysis
Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution. Pets and other non-food producing animals — — 5 000 
1. In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting.

2. For safety: breathing protection, eye protection and gloves shall be used during handling.

3. The mixture of different sources of sodium bisulphate must not exceed the maximum permitted level in complete feedingstuff of 5 000 mg/kg complete feedingstuff.
 8 March 2022

ANNEX II

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg/kg of complete feedingstuff with a moisture content of 12 %
Category of sensory additives. Functional group: flavouring compounds
1j514ii — Sodium bisulphate 
 Additive composition
Sodium bisulphate: ≥ 95,2 %
 Characterisation of the active substance
Sodium bisulphate CAS No 7681-38-1

 NaHSO4
 Na 19,15 %
 SO4 80,01 %Produced by chemical synthesis
 Method of analysis
Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution. Pets — — 5 000 
1. In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting.

2. For safety: breathing protection, eye protection and gloves shall be used during handling.

3. The mixture of different sources of sodium bisulphate must not exceed the maximum permitted level in complete feedingstuff of 5 000 mg/kg complete feedingstuff.
 8 March 2022
