
Article 1 
The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Article 2 
Binding tariff information issued by the customs authorities of Member States, which is not in accordance with this Regulation, can continue to be invoked for a period of three months under Article 12(6) of Regulation (EEC) No 2913/92.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 26 November 2012.
For the Commission, On behalf of the President,
Algirdas ŠEMETA
Member of the Commission
ANNEX

Description of the goods Classification(CN code) Reasons
(1) (2) (3)
A panel (so-called "waterproof plywood") made of thirteen sheets of wood glued together with a glue resistant to boiling water. The sheets are disposed so that the grains of successive layers are at an angle.The inner sheets are less than 2 mm thick. The two outer sheets are less than 1 mm thick and are made of poplar covered with a polymer coating for insulation.The panel's density is of 0,5 g/cm3.The panel is used in construction, for example, for concrete shuttering. 4412 32 10 Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 4412, 4412 32 and 4412 32 10.Classification under heading 4413 as densified wood is excluded as the panel has not been chemically or physically treated to increase its density or hardness and improve its mechanical strength or resistance to chemical or electrical agencies (see also the HS Explanatory Notes to heading 4413).The panel is considered to be plywood as it consists of several sheets of wood glued and disposed one on the other so that the grains of successive layers are at an angle (see also the HS Explanatory Notes to heading 4412, point (1)).The panel is therefore to be classified under CN code 4412 32 10 as other plywood with at least one outer ply of non-coniferous wood.