
Article 1 
Annex II to Directive 96/73/EC is amended in accordance with the Annex to this Directive.
Article 2 

1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 30 July 2012 at the latest. They shall forthwith communicate to the Commission the text of those provisions.When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
Article 3 
This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
Article 4 
This Directive is addressed to the Member States.
Done at Brussels, 29 July 2011.
For the Commission
The President
José Manuel BARROSO
ANNEX

Chapter 2 of Annex II to Directive 96/73/EC is amended as follows:

((1)) the Summary Table is replaced by the following:
'

2.Method Field of application Reagent
Soluble component Insoluble component
1. Acetate Certain other fibres Acetone
2. Certain protein fibres Certain other fibres Hypochlorite
3. Viscose, cupro or certain types of modal Certain other fibres Formic acid and zinc chloride
4. Polyamide or nylon Certain other fibres Formic acid, 80 % m/m
5. Acetate Certain other fibres Benzyl alcohol
6. Triacetate or polylactide Certain other fibres Dichloromethane
7. Certain cellulose fibres Certain other fibres Sulphuric acid, 75 % m/m
8. Acrylics, certain modacrylics or certain chlorofibres Certain other fibres Dimethylformamide
9. Certain chlorofibres Certain other fibres Carbon disulphide/acetone, 55,5/44,5 v/v
10. Acetate Certain other fibres Glacial acetic acid
11. Silk, polyamide or nylon Certain other fibres Sulphuric acid, 75 % m/m
12. Jute Certain animal fibres Nitrogen content method
13. Polypropylene Certain other fibres Xylene
14. Certain fibres Certain other fibres Concentrated sulphuric acid method
15. Chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates Certain other fibres Cyclohexanone
16. Melamine Certain other fibres Hot formic acid 90 % m/m
'
((2)) point 1.2 of method No 1 is replaced by the following:
'
2.. wool (1), animal hair (2 and 3), silk (4), cotton (5), flax (7) true hemp (8), jute (9), abaca (10), alfa (11), coir (12), broom (13), ramie (14), sisal (15), cupro (21), modal (22), protein (23), viscose (25), acrylic (26), polyamide or nylon (30), polyester (35), polypropylene (37), elastomultiester (46), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).In no circumstances is the method applicable to acetate fibres which have been deacetylated on the surface.';
((3)) point 1.2 of method No 2 is replaced by the following:
'
2.. cotton (5), cupro (21), viscose (25), acrylic (26), chlorofibres (27), polyamide or nylon (30), polyester (35), polypropylene (37), elastane (43), glass fibre (44) elastomultiester (46), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).If different protein fibres are present, the method gives the total of their amounts but not their individual quantities.';
((4)) method No 3 is amended as follows:

((a)) the title is replaced by the following:
'VISCOSE, CUPRO OR CERTAIN TYPES OF MODAL AND CERTAIN OTHER FIBRES(Method using formic acid and zinc chloride)'
((b)) point 1.2 is replaced by the following:
'
2.. cotton (5), polypropylene (37), elastolefin (47) and melamine (48).If a modal fibre is found to be present, a preliminary test shall be carried out to see whether it is soluble in the reagent.This method is not applicable to mixtures in which the cotton has suffered extensive chemical degradation nor when the viscose or cupro is rendered incompletely soluble by the presence of certain dyes or finishes that cannot be removed completely.';
((c)) point 5 is replaced by the following:
'
5. 
Calculate the results as described in the general instructions. The value of “d” is 1,00, except for cotton, for which “d” = 1,02 and for melamine, for which “d” = 1,01.
';
((5)) method No 5 is amended as follows:

((a)) the title is replaced by the following:
'ACETATE AND CERTAIN OTHER FIBRES(Method using benzyl alcohol)'
((b)) point 1.2 is replaced by the following:
'
2.. triacetate (24), polypropylene (37), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).';
((6)) method No 6 is amended as follows:

((a)) the title is replaced by the following:
'TRIACETATES OR POLYLACTIDE AND CERTAIN OTHER FIBRES(Method using dichloromethane)'
((b)) point 1.2 is replaced by the following:
'
2.. wool (1), animal hair (2 and 3), silk (4), cotton (5), cupro (21), modal (22), viscose (25), acrylic (26), polyamide or nylon (30), polyester (35), polypropylene (37), glass fibre (44) elastomultiester (46), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).Triacetate fibres which have received a finish leading to partial hydrolysis cease to be completely soluble in the reagent. In such cases, the method is not applicable.';
((7)) method No 7 is amended as follows:

((a)) the title is replaced by the following:
'CERTAIN CELLULOSE FIBRES AND CERTAIN OTHER FIBRES(Method using 75 % m/m sulphuric acid)'
((b)) point 1.2 is replaced by the following:
'
2.. polyester (35), polypropylene (37), elastomultiester (46), elastolefin (47) and polypropylene/polyamide bicomponent (49).';
((c)) point 5 is replaced by the following:

“5. 
Calculate the results as described in the general instructions. The value of “d” is 1,00, except for polypropylene/polyamide bicomponent, for which the value of “d” is 1,01.’
;
((8)) point 1.2 of method No 8 is replaced by the following:
'
2.. wool (1), animal hair (2 and 3), silk (4), cotton (5), cupro (21), modal (22), viscose (25), polyamide or nylon (30), polyester (35), polypropylene (37), elastomultiester (46), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).It is equally applicable to acrylics, and certain modacrylics, treated with pre-metallised dyes, but not to those dyed with afterchrome dyes.';
((9)) point 1.2 of method No 9 is replaced by the following:
'
2.. wool (1), animal hair (2 and 3), silk (4), cotton (5), cupro (21), modal (22), viscose (25), acrylic (26), polyamide or nylon (30), polyester (35), polypropylene (37), glass fibre (44), elastomultiester (46), melamine (48) and polypropylene/polyamide bicomponent (49).When the wool or silk content of the mixture exceeds 25 %, method No 2 shall be used.When the polyamide or nylon content of the mixture exceeds 25 %, method No 4 shall be used.';
((10)) method No 10 is amended as follows:

((a)) the title is replaced by the following:
'ACETATE AND CERTAIN OTHER FIBRES(Method using glacial acetic acid)'
((b)) point 1.2 is replaced by the following:
'
2.. certain chlorofibres (27) namely polyvinyl chloride fibres, whether after-chlorinated or not, polypropylene (37), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).';
((11)) method No 11 is amended as follows:

((a)) the title is replaced by the following:
'SILK OR POLYAMIDE AND CERTAIN OTHER FIBRES(Method using 75 % m/m sulphuric acid)'
((b)) point 1 is replaced by the following:
'
1. 
This method is applicable, after removal of non-fibrous matter, to binary mixtures of:


1.. silk (4) or polyamide or nylon (30)
with
2.. wool (1), animal hair (2 and 3), polypropylene (37), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).
';
((c)) point 2 is replaced by the following:
'
2. 
The silk or polyamide or nylon fibre is dissolved out from a known dry mass of the mixture, with 75 % m/m sulphuric acid.

The residue is collected, washed, dried and weighed. Its mass, corrected if necessary, is expressed as a percentage of the dry mass of the mixture. The percentage of the dry silk or polyamide or nylon is found by difference.
'
((d)) point 4 is replaced by the following:
'
4. 
Follow the procedure described in the general instructions and proceed as follows:


 To the specimen contained in a glass-stoppered conical flask of at least 200 ml capacity, add 100 ml of 75 % m/m sulphuric acid per gram of specimen and insert the stopper. Shake vigorously and stand for 30 minutes at room temperature. Shake again and stand for 30 minutes. Shake a last time and filter the contents of the flask through the weighed filter crucible. Wash any remaining fibres from the flask with the 75 % sulphuric acid reagent. Wash the residue on the crucible successively with 50 ml of the dilute sulphuric acid reagent, 50 ml water and 50 ml of the dilute ammonia solution. Each time allow the fibres to remain in contact with the liquid for about 10 minutes before applying suction. Finally rinse with water, leaving the fibres in contact with the water for about 30 minutes. Drain the crucible with suction, dry the crucible and residue, and cool and weigh them.
 In the case of binary mixtures of polyamide with polypropylene/polyamide bicomponent, after filtering fibres through the weighed filter crucible and before applying the described washing procedure, wash twice the residue on the filter crucible with 50 ml of 75 % sulphuric acid reagent each time.
';
((e)) points 5 and 6 are replaced by the following:
'
5. 
Calculate the results as described in the general instructions. The value of “d” is 1,00, except for wool, for which “d” = 0,985, for polypropylene/polyamide bicomponent, for which “d” = 1,005 and for melamine, for which “d” = 1,01.

6. 
On a homogeneous mixture of textile materials, the confidence limits of results obtained by this method are not greater than ± 1 for a confidence level of 95 %, except for binary mixtures of polyamide with polypropylene/polyamide bicomponent for which the confidence limits of results are not greater than ± 2.
';
((12)) method No 14 is amended as follows:

((a)) the title is replaced by the following:
'CERTAIN FIBRES AND CERTAIN OTHER FIBRES(Method using concentrated sulphuric acid)'
((b)) point 1.2 is replaced by the following:
'
2.. chlorofibres (27) based on homopolymers of vinyl chloride, whether after-chlorinated or not, polypropylene (37), elastolefin (47), melamine (48) and polypropylene/polyamide bicomponent (49).The modacrylics concerned are those which give a limpid solution when immersed in concentrated sulphuric acid (relative density 1,84 at 20 °C).This method can be used in place of methods No 8 and No 9.';
((c)) point 2 is replaced by the following:
'
2. 
The constituent other than the chlorofibre, polypropylene, elastolefin, melamine or polypropylene/polyamide bicomponent (i.e. the fibres mentioned in paragraph 1.1) is dissolved out from a known dry mass of the mixture with concentrated sulphuric acid (relative density 1,84 at 20 °C). The residue, consisting of the chlorofibre, polypropylene, elastolefin, melamine or polypropylene/polyamide bicomponent is collected, washed, dried and weighed; its mass, corrected if necessary, is expressed as a percentage of the dry mass of the mixture. The percentage of the second constituents is obtained by difference.
';
((d)) point 5 is replaced by the following:
'
5. 
Calculate the results as described in the general instructions. The value of “d” is 1,00, except for melamine and polypropylene/polyamide bicomponent, for which the value of “d” is 1,01.
';
((13)) method No 16 is amended as follows:

((a)) the title is replaced by the following:
'MELAMINE AND CERTAIN OTHER FIBRES(Method using hot formic acid)'
((b)) point 1.2 is replaced by the following:
'
2.. cotton (5), aramid (31) and polypropylene (37).'.
