
Article 1 
For the purposes of this Decision ‘stationary training equipment’ means a product driven or not by a motor, used for training, exercising, diagnostic or rehabilitation purposes, involving repetitive movements and which remains static during use. This equipment either stands on the floor, or is fixed to the ceiling or a wall or other fixed structure.
Article 2 
The specific safety requirements for the products referred to in Article 1 to be met by European standards pursuant to Article 4 of Directive 2001/95/EC are set out in the Annex to this Decision.
Article 3 
This Decision shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
Done at Brussels, 27 July 2011.
For the Commission
The President
José Manuel BARROSO
ANNEX

Part I
The stationary training equipment covered by this mandate is used for training, exercising, diagnostic or rehabilitation purposes, involving repetitive movements. The equipment remains static during use. It either stands on the floor, or is fixed to the ceiling, a wall or other fixed structure.

This equipment is generally used in fitness studios, hotels, sports and health clubs, rehabilitation centres, or at home. The area in which the equipment is used constitutes a ‘training area’, access to which may be restricted to users and professional staff (e.g. trainers, medical staff).

Motor-driven equipment is included within the scope of these requirements for the risks not covered by the Machinery Directive (Directive 2006/42/EC of the European Parliament and of the Council).

For some specific training equipment, additional safety requirements are provided to complement general requirements.

If the intended use of the stationary training equipment is also covered by Council Directive 93/42/EEC of 14 June 1993 concerning medical devices, the applicable additional requirements shall be fulfilled.

Stationary training equipment covered by this mandate should be classified by specific accuracy and usage classes, according to the purpose of the equipment:

Class Ahigh accuracy;Class Bmedium accuracy;Class Cminimum accuracy.

Class S (Studio)professional and/or commercial use;Class H (Home)domestic use;Class Iprofessional and/or commercial use, including use by people with special needs (e.g. visual, hearing, physical or learning disabilities)

Part II
A. 
The products shall comply with the general safety requirement referred to in Directive 2001/95/EC and be ‘safe’ within the meaning of Article 2(b) thereof. In particular, the product shall be safe under normal and foreseeable conditions of use (including, for example, storage, transport to the storage space, installation, dismantling and maintenance) throughout the life of the product. The equipment should also be safe for professional users (e.g. trainers, teachers).

During normal reasonable and foreseeable conditions of stationary training equipment the risk of injury or damage to health and safety shall be minimised. All parts accessible to the user — or third parties — during normal or intended use shall not cause physical injuries or influence the health of the user negatively.

Users shall be informed of the risks and dangers likely to occur and how to prevent them.

Although training equipment is not intended for children, these products are becoming increasingly popular at home and may therefore be easily accessible to them. Accidents with home equipment involving children can lead to severe injuries (mainly to fingers and toes), as well as burns, lacerations and strangulations. Where such risks cannot be sufficiently minimised by design or safeguards, the residual risk shall be addressed by product-related information directed at parents or caregivers.

B. 
In applying the general safety requirement referred to in Directive 2001/95/EC, the following shall be taken into account, as a minimum:


((a)) Stability of free-standing equipment;
((b)) Sharp edges and burrs;
((c)) Tube ends;
((d)) Squeeze, shear, rotating and reciprocating points within the accessible area;
((e)) Weights;
((f)) Equipment access and escape;
((g)) Adjustment and locking mechanisms;
((h)) Ropes, belts and chains;
((i)) Wire ropes and pulleys;
((j)) Rope and belt guides;
((k)) Pull-in points;
((l)) Gripping positions;
((m)) Integral handgrips;
((n)) Applied handgrips;
((o)) Rotating handgrips;
((p)) Electrical safety;
((q)) Care and maintenance;
((r)) Assembly instructions;
((s)) General instructions for use;
((t)) Basic biomechanical requirements;
((u)) Marking;
((v)) Warnings, especially concerning risks for children;
((w)) Immobilisation unit especially for children by locking the power out.

In applying the general safety requirement referred to in Directive 2001/95/EC, the following tests shall be taken into account, as a minimum:


((a)) Dimensional check;
((b)) Visual examination;
((c)) Tactile examination;
((d)) Performance test;
((e)) Manufacturer’s certificate;
((f)) Testing of pull-in points;
((g)) Test conditions;
((h)) Stability test;
((i)) Determination of breaking load of ropes, belts and chains;
((j)) Testing of flywheels;
((k)) Determination of the removing force of applied handgrips;
((l)) Testing of access/escape;
((m)) Testing of endurance load;
((n)) Testing of heart rate control mode;
((o)) Testing of accuracy of the power readouts;
((p)) Assessment of the instructions and warnings;
((q)) Test report.
