
Article 1 
Decision 2005/7/EC is amended as follows:

1.. Article 1 is replaced by the following:
'
Article 1 
The use of the following methods is authorised for grading pig carcasses pursuant to point 1 of Section B.IV of Annex V to Council Regulation (EC) No 1234/2007 in Cyprus:

— the “Hennessy Grading Probe (HGP 4)” apparatus and the assessment methods related thereto, details of which are given in Part I of the Annex,
— the “Ultra FOM 300” apparatus and the assessment methods related thereto, details of which are given in Part II of the Annex.
As regards the apparatus “Ultra FOM 300”, referred to in the second indent of the first subparagraph, after the end of the measurement procedure it must be possible to verify on the carcass that the apparatus measured the values of measurements X1 and X2 on the site provided for in the Annex, Part II, point 3. The corresponding marking of the measurement site must be made at the same time as the measurement procedure.';
2.. the Annex is replaced by the text in the Annex to this Decision.
Article 2 
This Decision shall apply from 5 September 2011.
Article 3 
This Decision is addressed to the Republic of Cyprus.
Done at Brussels, 14 July 2011.
For the Commission
Dacian CIOLOŞ
Member of the Commission
ANNEX


ANNEX 
PART I 1. The rules provided for in this Part shall apply when the grading of pig carcasses is carried out by means of the apparatus known as “Hennessy Grading Probe (HGP 4)”.
 2. The apparatus shall be equipped with a probe of 5,95 millimetres diameter (and of 6,3 millimetres at the blade of the top of the probe) containing a photodiode (Siemens LED of the type LYU 260-EO) and photodetector of the type 58 MR and having an operating distance of between 0 and 120 millimetres. The results of the measurements shall be converted into estimated lean meat content by means of the HGP 4 itself or a computer linked to it.
 3. Ŷ = 61,10 – 0,629 X1 + 0,160 X2
where:

Ŷthe estimated percentage of lean meat in the carcass,X1the thickness of back-fat (including rind) in millimetres, measured at 6 centimetres off the midline of the split carcass, between the third and fourth last ribs,X2the thickness of the dorsal muscle in millimetres, measured at the same time and in the same place as X1.

This formula shall be valid for carcasses weighing between 55 and 120 kilograms.

PART II 1. The rules provided for in this Part shall apply when the grading of pig carcasses is carried out by means of the apparatus known as “Ultra FOM 300”.
 2. 
The results of the measurements shall be converted into estimated lean meat content by the Ultra FOM 300 apparatus itself.
 3. Ŷ = 65,51 – 0,779 X1 + 0,111 X2
where:

Ŷthe estimated percentage of lean meat in the carcass,X1the thickness of back-fat (including rind) in millimetres, measured at 6 centimetres off the midline of the split carcass, between the third and fourth last ribs,X2the thickness of the dorsal muscle in millimetres, measured at the same time and in the same place as X1.

This formula shall be valid for carcasses weighing between 55 and 120 kilograms.

