
Article 1 
Annex I to Directive 98/8/EC is amended in accordance with the Annex to this Directive.
Article 2 

1. Member States shall adopt and publish, by 30 June 2009 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those provisions and a correlation table between those provisions and this Directive.They shall apply those provisions from 1 July 2010.When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
Article 3 
This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
Article 4 
This Directive is addressed to the Member States.
Done at Brussels, 28 July 2008.
For the Commission
Stavros DIMAS
Member of the Commission
ANNEX

The following entry ‘No 11’ is inserted in Annex I to Directive 98/8/EC:

No Common name IUPAC nameIdentification numbers Minimum purity of the active substance in the biocidal product as placed on the market Date of inclusion Deadline for compliance with Article 16(3)(except for products containing more than one active substance, for which the deadline to comply with Article 16(3) shall be the one set out in the last of the inclusion decisions relating to its active substances) Expiry date of inclusion Product type Specific provisions
‘11 IPBC 3-iodo-2-propynyl butylcarbamateEC No: 259-627-5CAS No: 55406-53-6 980 g/kg 1 July 2010 30 June 2012 30 June 2020 8 Member States shall ensure that authorisations are subject to the following conditions:
 In view of the assumptions made during the risk assessment, products authorised for industrial and/or professional use, must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means.
 In view of the risks identified for the soil and aquatic compartments appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter or on impermeable hardstanding to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.’

