
Article 1 
The Annex to Decision 2003/43/EC is amended as set out in the Annex to this Decision.
Article 2 
This Decision is addressed to the Member States.
Done at Brussels, 15 May 2007.
For the Commission
Günter VERHEUGEN
Vice-President
ANNEX

In the Annex to Decision 2003/43/EC, Table 1 is replaced by the following:
'
Product EN product standard End use condition Minimum density(kg/m3) Minimum thickness(mm) Class(excluding floorings) Class(floorings)
Cement-bonded particleboard EN 634-2 without an air gap behind the panel 1 000 10 B-s1, d0 Bfl-s1
Fibreboard, hard EN 622-2 without an air gap behind the wood-based panel 900 6 D-s2, d0 Dfl-s1
Fibreboard, hard EN 622-2 with a closed air gap not more than 22 mm behind the wood-based panel 900 6 D-s2, d2 —
Particleboard,, EN 312 without an air gap behind the wood-based panel 600 9 D-s2, d0 Dfl-s1
Fibreboard, hard and medium,, EN 622-2EN 622-3
MDF,, EN 622-5
MDF,, EN 300
Plywood,, EN 636 -“- 400 9 D-s2, d0 Dfl-s1
Solid wood panel,, EN 13353 12
Flaxboard,, EN 15197 -“- 450 15 D-s2, d0 Dfl-s1
Particleboard, EN 312 with a closed or an open air gap not more than 22 mm behind the wood-based panel 600 9 D-s2, d2 —
Fibreboard, hard and medium, EN 622-2EN 622-3
MDF, EN 622-5
OSB, EN 300
Plywood, EN 636 -“- 400 9 D-s2, d2 —
Solid wood panel, EN 13353 12
Particleboard, EN 312 with a closed air gap behind the wood-based panel 600 15 D-s2, d0 Dfl-s1
Fibreboard, medium, EN 622-3
MDF, EN 622-5
OSB, EN 300
Plywood, EN 636 -“- 400 15 D-s2, d1 Dfl-s1
Solid wood panel, EN 13353 D-s2, d0
Flaxboard, EN 15197 -“- 450 15 D-s2, d0 Dfl-s1
Particleboard, EN 312 with an open air gap behind the wood-based panel 600 18 D-s2, d0 Dfl-s1
Fibreboard, medium, EN 622-3
MDF, EN 622-5
OSB, EN 300
Plywood, EN 636 -“- 400 18 D-s2, d0 Dfl-s1
Solid wood panel, EN 13353
Flaxboard, EN 15197 -“- 450 18 D-s2, d0 Dfl-s1
Particleboard EN 312 any 600 3 E Efl
OSB EN 300
MDF EN 622-5 -“- 400 3 E Efl
250 9 E Efl
Plywood EN 636 -“- 400 3 E Efl
Fibreboard, hard EN 622-2 -“- 900 3 E Efl
Fibreboard, medium EN 622-3 -“- 400 9 E Efl
Fibreboard, soft EN 622-4 -“- 250 9 E Efl







'
