
Article 1 
This Regulation establishes an integrated pollutant release and transfer register at Community level (hereinafter ‘the European PRTR’) in the form of a publicly accessible electronic database and lays down rules for its functioning, in order to implement the UNECE Protocol on Pollutant Release and Transfer Registers (hereinafter ‘the Protocol’) and facilitate public participation in environmental decision-making, as well as contributing to the prevention and reduction of pollution of the environment.
Article 2 
For the purposes of this Regulation the following definitions shall apply:

((1)) ‘the public’ means one or more natural or legal persons, and, in accordance with national legislation or practice, their associations, organisations or groups;
((2)) ‘competent authority’ means the national authority or authorities, or any other competent body or bodies, designated by the Member States;
((3)) ‘installation’ means a stationary technical unit where one or more activities listed in Annex I are carried out, and any other directly associated activities which have a technical connection with the activities carried out on that site and which could have an effect on emissions and pollution;
((4)) ‘facility’ means one or more installations on the same site that are operated by the same natural or legal person;
((5)) ‘site’ means the geographical location of the facility;
((6)) ‘operator’ means any natural or legal person who operates or controls the facility or, where this is provided for in national legislation, to whom decisive economic power over the technical functioning of the facility has been delegated;
((7)) ‘reporting year’ means the calendar year for which data on releases of pollutants and off-site transfers must be gathered;
((8)) ‘substance’ means any chemical element and its compounds, with the exception of radioactive substances;
((9)) ‘pollutant’ means a substance or a group of substances that may be harmful to the environment or to human health on account of its properties and of its introduction into the environment;
((10)) ‘release’ means any introduction of pollutants into the environment as a result of any human activity, whether deliberate or accidental, routine or non-routine, including spilling, emitting, discharging, injecting, disposing or dumping, or through sewer systems without final waste-water treatment;
((11)) ‘off-site transfer’ means the movement beyond the boundaries of a facility of waste destined for recovery or disposal and of pollutants in waste water destined for waste-water treatment;
((12)) ‘diffuse sources’ means the many smaller or scattered sources from which pollutants may be released to land, air or water, whose combined impact on those media may be significant and for which it is impractical to collect reports from each individual source;
((13)) ‘waste’ means any substance or object as defined in Article 1(a) of Council Directive 75/442/EEC of 15 July 1975 on waste;
((14)) ‘hazardous waste’ means any substance or object as defined in Article 1(4) of Directive 91/689/EEC;
((15)) ‘waste water’ means urban, domestic and industrial waste water, as defined in Article 2(1), (2) and (3) of Council Directive 91/271/EEC of 21 May 1991 concerning urban waste water treatment, and any other used water which is subject, because of the substances or objects it contains, to regulation by Community law;
((16)) ‘disposal’ means any of the operations provided for in Annex IIA to Directive 75/442/EEC;
((17)) ‘recovery’ means any of the operations provided for in Annex IIB to Directive 75/442/EEC.
Article 3 
The European PRTR shall include information on:

((a)) releases of pollutants referred to in Article 5(1)(a) that must be reported by the operators of the facilities carrying out the activities listed in Annex I;
((b)) off-site transfers of waste referred to in Article 5(1)(b) and of pollutants in waste water referred to in Article 5(1)(c), that must be reported by the operators of the facilities carrying out the activities listed in Annex I;
((c)) releases of pollutants from diffuse sources referred to in Article 8(1), where available.
Article 4 

1. The Commission shall publish the European PRTR, presenting the data in both aggregated and non-aggregated forms, so that releases and transfers can be searched for and identified by:
(a) facility, including the facility's parent company where applicable, and its geographical location, including the river basin;
(b) activity;
(c) occurrence at Member State or Community level;
(d) pollutant or waste, as appropriate;
(e) each environmental medium (air, water, land) into which the pollutant is released;
(f) off-site transfers of waste and their destination, as appropriate;
(g) off-site transfers of pollutants in waste water;
(h) diffuse sources;
(i) facility owner or operator.
2. The European PRTR shall be designed for maximum ease of public access to allow the information, under normal operating conditions, to be continuously and readily accessible on the Internet and by other electronic means. Its design shall take into account the possibility of its future expansion and shall include all data reported for previous reporting years, up to at least the last ten previous reporting years.
3. The European PRTR shall include links to the following:
(a) the national PRTRs of Member States;
(b) other relevant existing, publicly accessible databases on subject matters related to PRTRs, including national PRTRs of other Parties to the Protocol and, where feasible, those of other countries;
(c) facilities' websites if they exist and links are volunteered by the facilities.
Article 5 

1. The operator of each facility that undertakes one or more of the activities specified in Annex I above the applicable capacity thresholds specified therein shall report the amounts annually to its competent authority, along with an indication of whether the information is based on measurement, calculation or estimation, of the following:
(a) releases to air, water and land of any pollutant specified in Annex II for which the applicable threshold value specified in Annex II is exceeded;
(b) off-site transfers of hazardous waste exceeding 2 tonnes per year or of non hazardous waste exceeding 2 000 tonnes per year, for any operations of recovery or disposal with the exception of the disposal operations of land treatment and deep injection referred to in Article 6, indicating with ‘R’ or ‘D’ respectively whether the waste is destined for recovery or disposal and, for transboundary movements of hazardous waste, the name and address of the recoverer or the disposer of the waste and the actual recovery or disposal site;
(c) off-site transfers of any pollutant specified in Annex II in waste water destined for waste-water treatment for which the threshold value specified in Annex II, column 1b is exceeded.
The operator of each facility that undertakes one or more of the activities specified in Annex I above the applicable capacity thresholds specified therein shall communicate to its competent authority the information identifying the facility in accordance with Annex III unless that information is already available to the competent authority.In the case of data indicated as being based on measurement or calculation the analytical method and/or the method of calculation shall be reported.The releases referred to in Annex II reported under point (a) of this paragraph shall include all releases from all sources included in Annex I at the site of the facility.
2. The information referred to in paragraph 1 shall include information on releases and transfers resulting as totals of all deliberate, accidental, routine and non-routine activities.In providing this information operators shall specify, where available, any data that relate to accidental releases.
3. The operator of each facility shall collect with appropriate frequency the information needed to determine which of the facility's releases and off-site transfers are subject to reporting requirements under paragraph 1.
4. When preparing the report, the operator concerned shall use the best available information, which may include monitoring data, emission factors, mass balance equations, indirect monitoring or other calculations, engineering judgements and other methods in line with Article 9(1) and in accordance with internationally approved methodologies, where these are available.
5. The operator of each facility concerned shall keep available for the competent authorities of the Member State the records of the data from which the reported information was derived for a period of five years, starting from the end of the reporting year concerned. These records shall also describe the methodology used for data gathering.
Article 6 
Waste which is subject to ‘land treatment’ or ‘deep injection’ disposal operations, as specified in Annex IIA to Directive 75/442/EEC, shall be reported as a release to land only by the operator of the facility originating the waste.
Article 7 

1. The Member States shall determine, having regard to the requirements set out in paragraphs 2 and 3 of this Article, a date by which operators shall provide all the data referred to in Article 5(1) and (2) and the information referred to in Article 5(3), (4) and (5) to its competent authority.
2. Member States shall provide all the data referred to in Article 5(1) and (2) to the Commission by electronic transfer in the format set out in Annex III and within the following time-limits:
(a) for the first reporting year, within 18 months after the end of the reporting year;
(b) for all reporting years thereafter, within 15 months after the end of the reporting year.
The first reporting year shall be the year 2007.
3. The Commission, assisted by the European Environment Agency, shall incorporate the information reported by the Member States into the European PRTR within the following time-limits:
(a) for the first reporting year, within 21 months after the end of the reporting year;
(b) for all reporting years thereafter, within 16 months after the end of the reporting year.
Article 8 

1. The Commission, assisted by the European Environment Agency, shall include in the European PRTR information on releases from diffuse sources where such information exists and has already been reported by the Member States.
2. The information referred to in paragraph 1 shall be organised such as to allow users to search for and identify releases of pollutants from diffuse sources according to an adequate geographical disaggregation and shall include information on the type of methodology used to derive the information.
3. Where the Commission determines that no data on the releases from diffuse sources exist, it shall take measures to initiate reporting on releases of relevant pollutants from one or more diffuse sources in accordance with the procedure referred to in Article 19(2), using internationally approved methodologies where appropriate.
Article 9 

1. The operator of each facility subject to the reporting requirements set out in Article 5 shall assure the quality of the information that they report.
2. The competent authorities shall assess the quality of the data provided by the operators of the facilities referred to in paragraph 1, in particular as to their completeness, consistency and credibility.
3. The Commission shall coordinate work on quality assurance and quality assessment in consultation with the Committee referred to in Article 19(1).
4. The Commission may adopt guidelines for the monitoring and reporting of emissions in accordance with the procedure referred to in Article 19(2). These guidelines shall be in accordance with internationally approved methodologies, where appropriate, and shall be consistent with other Community legislation.
Article 10 

1. The Commission, assisted by the European Environment Agency, shall make the European PRTR publicly accessible by dissemination free of charge on the Internet in accordance with the timeframe set out in Article 7(3).
2. Where the information contained in the European PRTR is not easily accessible to the public by direct electronic means, the Member State concerned and the Commission shall facilitate electronic access to the European PRTR in publicly accessible locations.
Article 11 
Whenever information is kept confidential by a Member State in accordance with Article 4 of Directive 2003/4/EC of the European Parliament and of the Council of 28 January 2003 on public access to environmental information, the Member State shall, in its report under Article 7(2) of this Regulation for the reporting year concerned, indicate separately for each facility claiming confidentiality the type of information that has been withheld and the reason for which it has been withheld.
Article 12 

1. The Commission shall provide the public with early and effective opportunities to participate in the further development of the European PRTR, including capacity-building and the preparation of amendments to this Regulation.
2. The public shall have the opportunity to submit any relevant comments, information, analyses or opinions within a reasonable timeframe.
3. The Commission shall take due account of such input and shall inform the public about the outcome of the public participation.
Article 13 
Access to justice in matters relating to public access to environmental information shall be ensured in accordance with Article 6 of Directive 2003/4/EC and, where the institutions of the Community are involved, in accordance with Articles 6, 7 and 8 of Regulation (EC) No 1049/2001 of the European Parliament and of the Council of 30 May 2001 regarding public access to European Parliament, Council and Commission documents.
Article 14 

1. The Commission shall draw up a guidance document supporting the implementation of the European PRTR as soon as possible but no later than four months before the beginning of the first reporting year and in consultation with the Committee referred to in Article 19(1).
2. The guidance document for implementation of the European PRTR shall address in particular details on the following:
(a) reporting procedures;
(b) the data to be reported;
(c) quality assurance and assessment;
(d) indication of type of withheld data and reasons why they were withheld in the case of confidential data;
(e) reference to internationally approved release determination and analytical methods, sampling methodologies;
(f) indication of parent companies;
(g) coding of activities according to Annex I to this Regulation and to Directive 96/61/EC.
Article 15 
The Commission and the Member States shall promote awareness of the public of the European PRTR and shall ensure that assistance is provided in accessing the European PRTR and in understanding and using the information contained in it.
Article 16 

1. Member States shall, in a single report based on the information from the last three reporting years to be delivered every three years together with the data provided in accordance with Article 7, inform the Commission on practice and measures taken regarding the following:
(a) requirements according to Article 5;
(b) quality assurance and assessment according to Article 9;
(c) access to information according to Article 10(2);
(d) awareness raising activities according to Article 15;
(e) confidentiality of information according to Article 11;
(f) penalties provided for according to Article 20 and experience with their application.
2. To facilitate the reporting by Member States referred to in paragraph 1 the Commission shall submit a proposal for a questionnaire, which shall be adopted in accordance with the procedure referred to in Article 19(2).
Article 17 

1. The Commission shall review the information provided by Member States according to Article 7 and after consultation with the Member States shall publish a report every three years based on the information from the last three reporting years available, six months after the presentation of this information on the Internet.
2. This report shall be submitted to the European Parliament and the Council, together with an assessment of the operation of the European PRTR.
Article 18 
Any amendment necessary for adapting:

((a)) Annexes II or III to this Regulation to scientific or technical progress,
or
((b)) Annexes II and III to this Regulation as a result of the adoption by the Meeting of the Parties to the Protocol of any amendment to the Annexes to the Protocol,
shall be adopted in accordance with the procedure referred to in Article 19(2).
Article 19 

1. The Commission shall be assisted by a committee.
2. Where reference is made to this paragraph, Articles 5 and 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.The period provided for in Article 5(6) of Decision 1999/468/EC shall be set at three months.
Article 20 

1. Member States shall lay down the rules on penalties applicable to infringements of the provisions of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for must be effective, proportionate and dissuasive.
2. The Member States shall notify those provisions to the Commission one year after entry into force of this Regulation at the latest and shall notify it without delay of any subsequent amendment affecting them.
Article 21 

1. Article 8(3) of Directive 91/689/EEC shall be deleted.
2. Article 15(3) of Directive 96/61/EC shall be deleted.
Article 22 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Strasbourg, 18 January 2006.
For the European Parliament
The President
J. BORRELL FONTELLES
For the Council
The President
H. WINKLER
ANNEX I

No Activity Capacity threshold
1. Energy sector 
(a) Mineral oil and gas refineries *
(b) Installations for gasification and liquefaction *
(c) Thermal power stations and other combustion installations With a heat input of 50 megawatts (MW)
(d) Coke ovens *
(e) Coal rolling mills With a capacity of 1 tonne per hour
(f) Installations for the manufacture of coal products and solid smokeless fuel *
2. Production and processing of metals 
(a) Metal ore (including sulphide ore) roasting or sintering installations *
(b) Installations for the production of pig iron or steel (primary or secondary melting) including continuous casting With a capacity of 2,5 tonnes per hour
(c) Installations for the processing of ferrous metals: 

(i) Hot-rolling mills
 With a capacity of 20 tonnes of crude steel per hour

(ii) Smitheries with hammers
 With an energy of 50 kilojoules per hammer, where the calorific power used exceeds 20 MW

(iii) Application of protective fused metal coats
 With an input of 2 tonnes of crude steel per hour
(d) Ferrous metal foundries With a production capacity of 20 tonnes per day
(e) Installations: 

(i) For the production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes
 *

(ii) For the smelting, including the alloying, of non-ferrous metals, including recovered products (refining, foundry casting, etc.)
 With a melting capacity of 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals
(f) Installations for surface treatment of metals and plastic materials using an electrolytic or chemical process Where the volume of the treatment vats equals 30 m3
3. Mineral industry 
(a) Underground mining and related operations *
(b) Opencast mining and quarrying Where the surface of the area effectively under extractive operation equals 25 hectares
(c) Installations for the production of: 

(i) Cement clinker in rotary kilns
 With a production capacity of 500 tonnes per day

(ii) Lime in rotary kilns
 With a production capacity of 50 tonnes per day

(iii) Cement clinker or lime in other furnaces
 With a production capacity of 50 tonnes per day
(d) Installations for the production of asbestos and the manufacture of asbestos-based products *
(e) Installations for the manufacture of glass, including glass fibre With a melting capacity of 20 tonnes per day
(f) Installations for melting mineral substances, including the production of mineral fibres With a melting capacity of 20 tonnes per day
(g) Installations for the manufacture of ceramic products by firing, in particular roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain With a production capacity of 75 tonnes per day, or with a kiln capacity of 4 m3 and with a setting density per kiln of 300 kg/m3
4. Chemical industry 
(a) Chemical installations for the production on an industrial scale of basic organic chemicals, such as:
((i)) Simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic)
((ii)) Oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters, acetates, ethers, peroxides, epoxy resins
((iii)) Sulphurous hydrocarbons
((iv)) Nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates
((v)) Phosphorus-containing hydrocarbons
((vi)) Halogenic hydrocarbons
((vii)) Organometallic compounds
((viii)) Basic plastic materials (polymers, synthetic fibres and cellulose-based fibres)
((ix)) Synthetic rubbers
((x)) Dyes and pigments
((xi)) Surface-active agents and surfactants *
(b) Chemical installations for the production on an industrial scale of basic inorganic chemicals, such as:
((i)) Gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride
((ii)) Acids, such as chromic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid, oleum, sulphurous acids
((iii)) Bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide
((iv)) Salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate
((v)) Non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide *
(c) Chemical installations for the production on an industrial scale of phosphorous-, nitrogen- or potassium-based fertilisers (simple or compound fertilisers) *
(d) Chemical installations for the production on an industrial scale of basic plant health products and of biocides *
(e) Installations using a chemical or biological process for the production on an industrial scale of basic pharmaceutical products *
(f) Installations for the production on an industrial scale of explosives and pyrotechnic products *
5. Waste and wastewater management 
(a) Installations for the recovery or disposal of hazardous waste Receiving 10 tonnes per day
(b) Installations for the incineration of non-hazardous waste in the scope of Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of waste With a capacity of 3 tonnes per hour
(c) Installations for the disposal of non-hazardous waste With a capacity of 50 tonnes per day
(d) Landfills (excluding landfills of inert waste and landfills, which were definitely closed before 16.7.2001 or for which the after-care phase required by the competent authorities according to Article 13 of Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste has expired) Receiving 10 tonnes per day or with a total capacity of 25 000 tonnes
(e) Installations for the disposal or recycling of animal carcasses and animal waste With a treatment capacity of 10 tonnes per day
(f) Urban waste-water treatment plants With a capacity of 100 000 population equivalents
(g) Independently operated industrial waste-water treatment plants which serve one or more activities of this annex With a capacity of 10 000 m3 per day
6. Paper and wood production and processing 
(a) Industrial plants for the production of pulp from timber or similar fibrous materials *
(b) Industrial plants for the production of paper and board and other primary wood products (such as chipboard, fibreboard and plywood) With a production capacity of 20 tonnes per day
(c) Industrial plants for the preservation of wood and wood products with chemicals With a production capacity of 50 m3 per day
7. Intensive livestock production and aquaculture 
(a) Installations for the intensive rearing of poultry or pigs 
((i)) With 40 000 places for poultry
((ii)) With 2 000 places for production pigs (over 30 kg)
((iii)) With 750 places for sows
(b) Intensive aquaculture With a production capacity of 1 000 tonnes of fish or shellfish per year
8. Animal and vegetable products from the food and beverage sector 
(a) Slaughterhouses With a carcass production capacity of 50 tonnes per day
(b) Treatment and processing intended for the production of food and beverage products from: 

(i) Animal raw materials (other than milk)
 With a finished product production capacity of 75 tonnes per day

(ii) Vegetable raw materials
 With a finished product production capacity of 300 tonnes per day (average value on a quarterly basis)
(c) Treatment and processing of milk With a capacity to receive 200 tonnes of milk per day (average value on an annual basis)
9. Other activities 
(a) Plants for the pre-treatment (operations such as washing, bleaching, mercerisation) or dyeing of fibres or textiles With a treatment capacity of 10 tonnes per day
(b) Plants for the tanning of hides and skins With a treatment capacity of 12 tonnes of finished product per day
(c) Installations for the surface treatment of substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating With a consumption capacity of 150 kg per hour or 200 tonnes per year
(d) Installations for the production of carbon (hard-burnt coal) or electro-graphite by means of incineration or graphitisation *
(e) Installations for the building of, and painting or removal of paint from ships With a capacity for ships 100 m long




ANNEX II

No CAS number Pollutant Threshold for releases(column 1)
to air(column 1a)kg/year to water(column 1b)kg/year to land(column 1c)kg/year
1 74-82-8 Methane (CH4) 100 000 — —
2 630-08-0 Carbon monoxide (CO) 500 000 — —
3 124-38-9 Carbon dioxide (CO2) 100 million — —
4  Hydro-fluorocarbons (HFCs) 100 — —
5 10024-97-2 Nitrous oxide (N2O) 10 000 — —
6 7664-41-7 Ammonia (NH3) 10 000 — —
7  Non-methane volatile organic compounds (NMVOC) 100 000 — —
8  Nitrogen oxides (NOx/NO2) 100 000 — —
9  Perfluorocarbons (PFCs) 100 — —
10 2551-62-4 Sulphur hexafluoride (SF6) 50 — —
11  Sulphur oxides (SOx/SO2) 150 000 — —
12  Total nitrogen — 50 000 50 000
13  Total phosphorus — 5 000 5 000
14  Hydrochlorofluorocarbons (HCFCs) 1 — —
15  Chlorofluorocarbons (CFCs) 1 — —
16  Halons 1 — —
17  Arsenic and compounds (as As) 20 5 5
18  Cadmium and compounds (as Cd) 10 5 5
19  Chromium and compounds (as Cr) 100 50 50
20  Copper and compounds (as Cu) 100 50 50
21  Mercury and compounds (as Hg) 10 1 1
22  Nickel and compounds (as Ni) 50 20 20
23  Lead and compounds (as Pb) 200 20 20
24  Zinc and compounds (as Zn) 200 100 100
25 15972-60-8 Alachlor — 1 1
26 309-00-2 Aldrin 1 1 1
27 1912-24-9 Atrazine — 1 1
28 57-74-9 Chlordane 1 1 1
29 143-50-0 Chlordecone 1 1 1
30 470-90-6 Chlorfenvinphos — 1 1
31 85535-84-8 Chloro-alkanes, C10-C13 — 1 1
32 2921-88-2 Chlorpyrifos — 1 1
33 50-29-3 DDT 1 1 1
34 107-06-2 1,2-dichloroethane (EDC) 1 000 10 10
35 75-09-2 Dichloromethane (DCM) 1 000 10 10
36 60-57-1 Dieldrin 1 1 1
37 330-54-1 Diuron — 1 1
38 115-29-7 Endosulphan — 1 1
39 72-20-8 Endrin 1 1 1
40  Halogenated organic compounds (as AOX) — 1 000 1 000
41 76-44-8 Heptachlor 1 1 1
42 118-74-1 Hexachlorobenzene (HCB) 10 1 1
43 87-68-3 Hexachlorobutadiene (HCBD) — 1 1
44 608-73-1 1,2,3,4,5,6-hexachlorocyclohexane(HCH) 10 1 1
45 58-89-9 Lindane 1 1 1
46 2385-85-5 Mirex 1 1 1
47  PCDD + PCDF (dioxins + furans) (as Teq) 0,0001 0,0001 0,0001
48 608-93-5 Pentachlorobenzene 1 1 1
49 87-86-5 Pentachlorophenol (PCP) 10 1 1
50 1336-36-3 Polychlorinated biphenyls (PCBs) 0,1 0,1 0,1
51 122-34-9 Simazine — 1 1
52 127-18-4 Tetrachloroethylene (PER) 2 000 10 —
53 56-23-5 Tetrachloromethane (TCM) 100 1 —
54 12002-48-1 Trichlorobenzenes (TCBs) (all isomers) 10 1 —
55 71-55-6 1,1,1-trichloroethane 100 — —
56 79-34-5 1,1,2,2-tetrachloroethane 50 — —
57 79-01-6 Trichloroethylene 2 000 10 —
58 67-66-3 Trichloromethane 500 10 —
59 8001-35-2 Toxaphene 1 1 1
60 75-01-4 Vinyl chloride 1 000 10 10
61 120-12-7 Anthracene 50 1 1
62 71-43-2 Benzene 1 000 200(as BTEX) 200(as BTEX)
63  Brominated diphenylethers (PBDE) — 1 1
64  Nonylphenol and Nonylphenol ethoxylates (NP/NPEs) — 1 1
65 100-41-4 Ethyl benzene — 200(as BTEX) 200(as BTEX)
66 75-21-8 Ethylene oxide 1 000 10 10
67 34123-59-6 Isoproturon — 1 1
68 91-20-3 Naphthalene 100 10 10
69  Organotin compounds(as total Sn) — 50 50
70 117-81-7 Di-(2-ethyl hexyl) phthalate (DEHP) 10 1 1
71 108-95-2 Phenols (as total C) — 20 20
72  Polycyclic aromatic hydrocarbons (PAHs) 50 5 5
73 108-88-3 Toluene — 200(as BTEX) 200(as BTEX)
74  Tributyltin and compounds — 1 1
75  Triphenyltin and compounds — 1 1
76  Total organic carbon (TOC) (as total C or COD/3) — 50 000 —
77 1582-09-8 Trifluralin — 1 1
78 1330-20-7 Xylenes — 200(as BTEX) 200(as BTEX)
79  Chlorides (as total Cl) — 2 million 2 million
80  Chlorine and inorganic compounds (as HCl) 10 000 — —
81 1332-21-4 Asbestos 1 1 1
82  Cyanides (as total CN) — 50 50
83  Fluorides (as total F) — 2 000 2 000
84  Fluorine and inorganic compounds (as HF) 5 000 — —
85 74-90-8 Hydrogen cyanide (HCN) 200 — —
86  Particulate matter (PM10) 50 000 — —
87 1806-26-4 Octylphenols and Octylphenol ethoxylates — 1 —
88 206-44-0 Fluoranthene — 1 —
89 465-73-6 Isodrin — 1 —
90 36355-1-8 Hexabromobiphenyl 0,1 0,1 0,1
91 191-24-2 Benzo(g,h,i)perylene  1 

















ANNEX III

Reference year 
Identification of the facility 
Name of the parent companyName of the facilityIdentification number of facilityStreet addressTown/villagePostal codeCountryCoordinates of the locationRiver basin districtNACE-code (4 digits)Main economic activityProduction volume (optional)Number of installations (optional)Number of operating hours in year (optional)Number of employees (optional)Text field for textual information or website address delivered by facility or parent company (optional) 
All Annex I activities of the facility (according to the coding system given in Annex I and the IPPC code where available) 
Activity 1 (main Annex I activity)Activity 2Activity N 
Release data to air for the facility for each pollutant exceeding threshold value (according to Annex II) Releases to air
Pollutant 1Pollutant 2Pollutant N M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated T: Totalin kg/yearA: accidentalin kg/year
Release data to water for the facility for each pollutant exceeding threshold value (according to Annex II) Releases to water
Pollutant 1Pollutant 2Pollutant N M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated T: Totalin kg/yearA: accidentalin kg/year
Release data to land for the facility for each pollutant exceeding threshold value (according to Annex II) Releases to land
Pollutant 1Pollutant 2Pollutant N M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated T: Totalin kg/yearA: accidentalin kg/year
Off-site transfer of each pollutant destined for waste-water treatment in quantities exceeding threshold value (according to Annex II) 
Pollutant 1Pollutant 2Pollutant N M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated in kg/year
Off-site transfers of hazardous waste for the facility exceeding threshold value (according to Article 5)
Within the country:For Recovery (R) M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated in tonnes/year
Within the country:For Disposal (D) M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated in tonnes/year
To other countries:For Recovery (R)Name of the recovererAddress of the recovererAddress of actual recovery site receiving the transfer M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated in tonnes/year
To other countries:For Disposal (D)Name of the disposerAddress of the disposerAddress of actual disposal site receiving the transfer M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated in tonnes/year
Off-site transfer of non-hazardous waste for the facility exceeding threshold value (according to Article 5)
For Recovery (R) M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated in tonnes/year
For Disposal (D) M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated in tonnes/year
Competent authority for requests of the public:NameStreet addressTown/villageTelephone NoFax NoE-mail address 
