
Article 1 
Annexes I, II and III to Directive 2003/37/EC are amended in accordance with Annex I to this Directive.
Article 2 
Annexes I and II to Directive 86/298/EEC are amended in accordance with Annex II to this Directive.
Article 3 
Annexes I and II to Directive 87/402/EEC are amended in accordance with Annex III to this Directive.
Article 4 

1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 31 December 2005 at the latest. They shall forthwith communicate to the Commission the text of those provisions and a correlation table between those provisions and this Directive.When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
Article 5 
This Directive shall enter into force on the twentieth day following its publication in the Official Journal of the European Union.
Article 6 
This Directive is addressed to the Member States.
Done at Brussels, 18 October 2005.
For the Commission
Günter VERHEUGEN
Vice-President
ANNEX I

Annexes I, II and III to Directive 2003/37/EC are amended as follows:

1.. In Annex I, Part 4, item 3.6.1, the words ‘OECD Code 1 or 2’ are replaced by ‘OECD Code 2’.
2.. Annex II is amended as follows:

((a)) in line 26.1, Chapter B, Part I, the words ‘Seat belt attachment points’ are replaced by ‘Seat belt anchorages.
((b)) Part II.C of Chapter B is replaced by the following:
'
Part II. C 
The test bulletins (complete) which conform to the OECD codes given below may be used in place of the test reports drawn up in compliance with the corresponding separate directives.


Number given in the table in Part I (separate directives) Subject OECD codes
10.1. 77/536/EEC Official tests on the protection structures of agricultural or forestry tractors (dynamic testing) Code 3
26.1. 76/115/EEC
16.1. 79/622/EEC Official tests on protective structures for agricultural or forestry tractors (static test) Code 4
26.1. 76/115/EEC
19.1. 86/298/EEC Official tests on the rear-mounted protection structures of narrow-track wheeled agricultural or forestry tractors Code 7
26.1. 76/115/EEC
21.1. 87/402/EEC Official tests on protection structures mounted on the front of narrow-track wheeled agricultural or forestry tractors Code 6
26.1. 76/115/EEC
 SD Official tests on the protection structures of agricultural or forestry track-laying tractors Code 8
26.1. 76/115/EEC


'
3.. In Annex III, Part I.A, item 3.6.1, the words ‘OECD Code 1 or 2’ are replaced by ‘OECD Code 2’.

ANNEX II

Annexes I and II to Directive 86/298/EEC are amended as follows:

1.. In Annex I, point 1 is replaced by the following:
'
1. The definitions and requirements of point 1 of Code 7 of OECD Decision C(2005) 1 of 29 March 2005, with the exception of point 1.1, shall apply.
'
2.. Annex II is replaced by the following text:

ANNEX II 
The technical requirements for the EC type-approval of rear-mounted roll-over protection structures of narrow-track wheeled agricultural or forestry tractors shall be those set out in point 3 of Code 7 of the OECD Decision C(2005) 1 of 29 March 2005, with the exception of points 3.1.4 (Test reports), 3.4 (Minor modifications), 3.5 (Labelling) and 3.6 (Seat belt anchorage performance).


ANNEX III

Annexes I and II to Directive 87/402/EEC are amended as follows:

1.. In Annex I, point 1 is replaced by the following:
'The definitions and requirements of point 1 of Code 6 of OECD Decision C(2005) 1 of 29 March 2005, with the exception of point 1.1, shall apply.'
2.. Annex II is replaced by the following text:

ANNEX II 
The technical requirements for the EC type-approval of roll-over protection structures mounted in front of the driver’s seat on narrow-track wheeled agricultural or forestry tractors shall be those set out in point 3 of Code 6 of OECD Decision C(2005) 1 of 29 March 2005, with the exception of points 3.2.4 (Test reports), 3.5 (Minor modifications), 3.6 (Labelling) and 3.7 (Seat belt anchorage performance).

