
1 
These Regulations may be cited as the Road Vehicles (Construction and Use) (Amendment) (No. 2) Regulations 1997 and shall come into force on 22nd April 1997.
2 
The Road Vehicles (Construction and Use) Regulations 1986 shall be further amended in accordance with the following provisions of these Regulations.
3 
In regulation 80(1), for the words “paragraph (2), (2A), (2B) and (2C)” there shall be substituted “paragraphs (2), (2A) and (2B)”.
4 

(1) Schedule 11A shall be amended as follows.
(2) In the heading to the Schedule for “80(2C)” there shall be substituted “80(2B)”.
(3) In paragraph 9(1)—
(a) in the definition of “loading unit” after the words “bi-modal vehicle” there shall be inserted “, road-rail semi-trailer”;
(b) after paragraph (b) of the definition of “railhead” there shall be inserted—“or,
(c) road-rail semi-trailers from the ground onto railway vehicles on the track of a railway,”;
(c) after the definition of “relevant receptacle” there shall be inserted the following definition—“
 “road-rail semi-trailer” means a semi-trailer constructed or adapted so as to be capable of being both used as a semi-trailer on roads and carried on a railway vehicle;”.
(5) In paragraph 9(4)—
(a) the word “and” after paragraph (a) shall be omitted; and
(b) at the end of sub-paragraph (b) there shall be inserted—“and
(c) a road-rail semi-trailer shall be regarded as being transported by railway in a relevant manner if and only if it is being carried on a railway vehicle which forms part of a train”.
(6) After paragraph 9(5) there shall be inserted the following sub-paragraph—“
(6) A road-rail semi-trailer shall be regarded, for the purposes of this Schedule, as not being transported by railway in a relevant manner at any time when it is being carried on a railway vehicle as part of an articulated vehicle.”
Signed by authority of the Secretary of State for Transport
John Watts
Minister of State,
Department of Transport
25th March 1997