
Article 1 
The goods described in column 1 of the annexed table are now classified within the combined nomenclature under the appropriate CN codes indicated in column 2 of the said table.
Article 2 
Binding tariff information issued by the customs authorities of Member States which do not conform to the rights established by this Regulation can continue to be invoked under the provisions of Article 12 (6) of Regulation (EEC) No 2913/92 for a period of three months.
Article 3 
This Regulation shall enter into force on the 21st day following its publication in the Official Journal of the European Communities.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 5 July 1994.
For the Commission
Christiane SCRIVENER
Member of the Commission
ANNEX

Description of goods Classification CN code Reasons
(1) (2) (3)

1. 
The adapter provides for the digital transmission of data between automatic data-processing machines within a digital network that works at 10 Mbps (megabits per second).
 8517 82 90 Classification is determined by the provisions of general rules 1 and 6 for the interpretation of the combined nomenclature, Note 5 to Chapter 84 and by the texts of CN codes 8517, 8517 82 and 8517 82 90.

2. 
The main elements of both adapters are: input/output boards, an interface board, a memory board, a control board (with active and passive components and monolithic integrated circuits) and a power supply board.

The apparatus digitally links two networks having different characteristics and so provides for the transmission of data.
 8517 82 90 Classification is determined by the provisions of general rules 1 and 6 for the interpretation of the combined nomenclature, Note 5 to Chapter 84 and by the texts of CN codes 8517, 8517 82 and 8517 82 90.

3. 
The apparatus makes it possible to attach up to four adapters to a 50-Mbps (Megabits per second) network for the digital transmission of data.
 8517 82 90 Classification is determined by the provisions of general rules 1 and 6 for the interpretation of the combined nomenclature, Note 5 to Chapter 84 and by the texts of CN codes 8517, 8517 82 and 8517 82 90.

4. 
The PIN photodetecting diode is mounted on a substrate which is mounted on a further substrate together with the other components, the whole being enclosed in a metal casing and connected to a length of fibre optic cable (pigtail connection).
 8517 90 92 Classification is determined by the provisions of general rules 1 and 6 for the interpretation of the combined nomenclature, Note 5 (B) (b) to Chapter 85 and by the texts of CN codes 8517, 8517 90 and 8517 90 92.

5. Parts of mobile telephones:
  Classification is determined by the provisions of general rules 1 and 6 for the interpretation of the combined nomenclature and by the texts of CN codes 8529, 8529 90 and 8529 90 98.

(a) 
The filter is constructed in the form of a band-pass filter.

It suppresses unwanted signals and noise from adjacent channels.
 8529 90 98

(b) 
The oscillator generates local signals which when mixed with the incoming high-frequency signals can be processed and demodulated into final speech signals.
 8529 90 98

6. Endotracheal tubes principally used with anaesthetic apparatus.
 9018 90 60 Classification is determined by the provisions of general rules 1 and 6 for the interpretation of the combined nomenclature, Note 2 b to Chapter 90 and by the texts of CN codes 9018, 9018 90 and 9018 90 60.

7. 
The circuit boards containing the components to be tested are placed on a contact panel where they are checkes.

The contacts on the panel send an electric impulse to each component on the circuit board. The tester determines whether the results obtained from a given component are above or below a reference value (usually a voltage or frequency), stored in its memory before testing starts, in order to detect any defects.
 9030 81 90 Classification is determined by the provisions of general rules 1 and 6 for the interpretation of the combined nomenclature, Note 3 to Chapter 90 and by the texts of CN codes 9030, 9030 81 and 9030 81 90. See also the explanatory notes to the combined nomenclature concerning subheading 9030 81 90.

8. 
The tester checks the overall performance of the circuit board.

The circuit board is attached to the connectors or placed on the contact panel. The tester sends electric impulses through the board and determines whether the results obtained for the board are above or below a reference value stored in its memory before testing starts.
 9030 81 90 Classification is determined by the provisions of general rules 1 and 6 for the interpreation of the combined nomenclature, Note 3 to Chapter 90 and by the wording of CN codes 9030, 9030 81 and 9030 81 90. See also the explanatory notes to the combined nomenclature concerning subheading 9030 81 90.