
1 
These Regulations may be cited as the Motor Vehicles (Type Approval for Goods Vehicles) (Great Britain) (Amendment) Regulations 1988 and shall come into force on 1st October 1988.
2 
The Motor Vehicles (Type Approval for Goods Vehicles) (Great Britain) Regulations 1982 shall be further amended in accordance with the following provisions of these Regulations.
3 
In regulation 4, after paragraph (8) there shall be inserted the following paragraph—“
(8A) Where in relation to item 2 in Schedule 1, a date is specified in column (6) of that Schedule (being a date of cessation of application of type approval requirements), that date shall not apply to any vehicle for which, or for a model of which, there is a type approval certificate or (as the case may be) a Minister’s approval certificate in force at the time but, in relation to such a vehicle, column (6) shall be read and shall have effect as if there appeared in that column a date one year later than the date specified therein.”.
4 
In Schedule 1—
(a) in item 2, “30.9.1989” shall be inserted in column (6) in the following two places, that is to say—
(i) opposite the entry in column 3(a) relating to Council Directive 70/220/EEC of 20 March 1970 as last amended by Council Directive 78/665/EEC of 14 July 1978, and
(ii) opposite the entry in column 3(a) relating to ECE Regulation 15 as revised on 6 March 1978.
(b) in item 2A, “30.9.89” shall be inserted in column (6)
(c) after item 2A, there shall be inserted as item 2B the item so numbered in Schedule 1 to these Regulations.
5 
At the end of regulation 4 there shall be added the following paragraph—“
(13) Schedule 1A shall have effect for the purpose of specifying, in relation to certain vehicles, dates which are to be read as if they appeared in column (5) of items 7 and 8 in Schedule 1.”.
6 
In Schedule 1, after item 6J there shall be added as items 7 and 8 the items so numbered in Schedule 1 to these Regulations.
7 
A schedule shall be inserted after Schedule 1 in accordance with the provisions of Schedule 2 to these Regulations.
Signed by authority of the Secretary of State
Peter Bottomley
Parliamentary Under Secretary of State,
Department of Transport
5th September 1988
SCHEDULE 1
Regulations 4 and 6


(1) (2) (3) (4) (5) (6)
  (a) (b) (c)
2B. Exhaust emissions. Council Directive 70/220/EEC of 20 March 1970 as amended by Council Directive 74/290/EEC of 28 May 1974, Commission Directive 77/102/EEC of 30 November 1976, Commission Directive 78/665/EEC of 14 July 1978, Council Directive 83/351/EEC of 16 June 1983 and Council Directive 88/76/EEC of 3 December 1987. L76, 6.4.70, p.1 (SE 1970(I), p.171), L159, 15.6.74, p.61, L32, 3.2.77, p32, L223, 14.8.78, p.48, L197, 20.7.83, p.1 and L36, 9.2.88 p.1. Design, construction and equipment requirements in Annex I, paragraph 6 and either—
(a) paragraph 5 as modified by paragraph 8.1, or
(b) paragraph 8.3 and paragraph 5 as modified by paragraph 8.3. 
1 
Vehicles with other than spark ignition engines.
2 
Vehicles over 3500kg maximum gross weight.
3 
Vehicles fuelled solely by liquid petroleum gas. 1.7.88.
7. Fuel. Council Directive 70/220/EEC of 20 March 1970 as amended by Council Directive 74/290/EEC of 28 May 1974, Commission Directive 77/102/EEC of 30 November 1976, Commission Directive 78/665/EEC of 14 July 1978, Council Directive 83/351 EEC of 16 June 1983 and Council Directive 88/76/EEC of 3 December 1987. L76, 6.4.70, p.1 (SE 1970(I), p.171), L159, 15.6.74, p.61, L32, 3.2.77, p.32, L223, 14.8.78, p.48, L197, 20.7.83, p.1 and L36, 9.2.88, p.1. Design requirement in Annex I, paragraph 5.1.2. 
1 
Vehicles with other than spark ignition engines.
2 
Vehicles fuelled solely by liquid petroleum gas. See regulation 4(13) and Schedule 1A.
8. Fuel input. Road Vehicles (Construction and Use) Regulations 1986.  Design, construction and equipment requirements in regulation 39B. 
1 
Vehicles with other than spark ignition engines.
2 
Vehicles fuelled solely by liquid petroleum gas. See regulation 4(13) and Schedule 1A.
SCHEDULE 2
Regulation 7

The following Schedule shall be inserted after Schedule 1 to the Motor Vehicles (Type Approval for Goods Vehicles) (Great Britain) Regulations 1982.“
SCHEDULE 1A
(see regulation 4(13) and Schedule 1)

Dates of application of Items 7 and 8 of Schedule 1

PART I
1 
In this Schedule—
 “EEC type approval certificate” means a certificate issued by a member state of the European Economic Community in accordance with Council Directive 70/220/EEC of 20 March 1970 as originally made or with any amendments which have from time to time been made before 5th September 1988;
 “engine capacity” means in the case of a reciprocating engine, the nominal swept volume and, in the case of a rotary engine, double the nominal swept volume;
 “relevant authority” means—
(a) in relation to an EEC type approval certificate issued by the United Kingdom, the Secretary of State, and
(b) in relation to an EEC type approval certificate issued by any other member state of the European Economic Community, the authority having power under the law of that state to issue that certificate.
2 
Items 7 and 8 of Schedule 1 shall have effect in relation to a vehicle as if the date applicable to that vehicle determined in accordance with the following provisions of this Schedule appeared in column (5) of those items.
3 
The date applicable to a vehicle shall be—
(a) where the vehicle is of a description specified in column 2 of the Table in Part II of this Schedule and the conditions specified in paragraph 4 are satisfied in relation to it, the date specified for a vehicle of that description on column 3 of the Table;
(b) where paragraph (a) does not apply but the vehicle is one for which, or for a model of which there is a type approval certificate or (as the case may be) a Minister’s approval certificate in force on 30th September 1989, 1st October 1990.
(c) in any other case, 1st October 1989.
4 
The conditions referred to in paragraph 3 are—
(a) that the vehicle is a model in relation to which there is in force an EEC type approval certificate issued before 1st October 1989;
(b) that the manufacturer of the vehicle has supplied to the relevant authority which issued the EEC type approval certificate, a certificate stating that adapting vehicles of that model to the fuel requirements specified in the Annexes to Council Directive 70/220/EEC as amended at 5th September 1988 would entail a change in material specification of the inlet or exhaust valve seats or a reduction in the compression ratio or an increase in the engine capacity to compensate for loss of power; and
(c) that the relevant authority has accepted the certificate referred to in sub-paragraph (b).
PART II

(1) (2) (3)
Item Description of vehicle Date in cases where paragraph 3(a) of Part I applies
1. Vehicles with an engine capacity of less than 1400cc. 1.10.1991.
2. Vehicles with an engine capacity of not less than 1400cc and not more than 2000cc. 1.10.1993.”
